In all factories, there should not be any shadows which limits the visibility of the employees which can cause accidents or eye strain.In all factories, there should not be any glares from directly any light source or indirectly polished surface.In every factory all glazed windows and skylights used for the lighting of the workroom shall be kept clean on both the sides and so far as agreement with the requirements of any rules made under sub-section (3) of section 13 will allow, free from obstruction.All part of the factory where employees are working or passing should have sufficient lighting either by natural or artificial source.Few important points from factory act for lighting are mentioned below: Illumination Standards as per Factory Act, 1948 (Section 17 – Lighting)Īs per factory act, 1948 section 17 there are few rules and regulations to be followed by all industries in India. There should not be any harsh shadows in industry. Reflected glares can be minimized of eliminated using light source of low luminance or increasing the angle from line of vision. Reduction in glares play major role in maintaining quality of illumination. It expects uniform brightness throughout the industrial area. Here Quality of illumination industry is referring to distribution of brightness in workplace area. And for critical works like operation theatre in hospitals it is required to maintain LUX levels at 1000.At Workshops lux level should be maintained at 600-700 LUX.In Shops, showrooms lex levels should be maintained at 500 LUX.To maintain standard LUX level for office, where people work on computers, laptops it is better to increase illumination to 400-500 LUX.If you are reading, drawing then it is better to maintain LUX levels around 200.Read more about Effect of Poor lighting at workplaceĭepending on the type of activity demand of degree of illumination differs. Adequate lighting also creates aggregable illuminous work environment. Ideally a lighting system should be designed in such way that it provides uniform distribution of light over entire workplace.Īnd adequacy of lighting is necessary to avoid occupational eye-strain and accidents due to poor lighting. It is also called as Illuminance or illumination. The standard unit to measure the intensity level of light is known as LUX. Lighting condition not only contributes to the safety but also make workplace more comforting and productive. Physical hazards can be prevented if sufficient lighting is available in workplace area. With all different visual task’s conditions, lighting should be suitable for adequate visibility in any industrial processes. Lux level Standards in Industry are recommendations from IS for sufficient light at workplace to maintain wellbeing, safety of workers and productive work environment.Ĭonsidering increasing industrial activities in India, where many people have to work with attention to details throughout day and night.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |